How To

How to Remove Overfilled Coolant (Step-by-Step)

Overfilled coolant can cause issues, you can use a syringe or use the radiator drain valve to remove the overfilled coolant.

In this article, we’re going to be talking about bearing clearances. I’ll explain how to measure and select the correct bearing clearance.

Wheel spacers can have several benefits when fitted to a car, in this article we’ll discuss the steps to installing them.

The purpose of the water box on a drag strip is to get the tyres wet. Getting the tyres wet before a burnout helps reduce drivetrain stress.

The front strut brace is a common modification on many cars, including the mk2 Focus ST and RS models, here’s how to install it.

In this article, we will go explain how to drain the brake fluid in a Dodge Sprinter, including the tools and supplies you will need.

You can test a crankshaft position sensor in two ways, based on whether your vehicle has an inductive or hall-effect sensor.

It’s crucial to relearn the crankshaft position sensor after a repair or replacement, see how to relearn the crank sensor.

Baking soda can be a good way to clean and flush through a radiator, it can removed blockages and debris from the coolant system.